cross software
英 [krɒs ˈsɒftweə(r)]
美 [krɔːs ˈsɔːftwer]
网络 交叉软件
双语例句
- What do you get when you cross a buzzword like "social networking" with an eye-glazing term like "enterprise software"?
如果将“社交网络”等专业术语与诸如“企业级软件”这样枯燥乏味的词儿联系在一起，结果是什么？ - The reliability of auto correlation and cross correlation between hardware and software for software and hardware combined system product is studied. This kind of food is neither too hard nor too soft, just suitaBle for the old and young.
研究了软硬件组合系统产品中，产品可靠性与硬件、软件可靠性的自相关性和互相关性.这种食品，软硬适中，对老幼都适宜。 - Three-Dimensional visualization modelling technology of geology and its application is a cross subject which includes geosciences, computer, software and information technology.
地质三维可视化建模技术及其应用是集地学、计算机科学、软件科学、信息技术等多科学的交叉技术。 - With development of computer science and technology, each domain influence each other, which is gradually form many cross branchs of learning. In this peper, machine learning method for software autonomy system is given.
随着计算机科学的发展各领域之间的相互渗透逐渐形成了许多交叉研究方向，基于此本文给出软件自动化系统中的机器学习方法。 - It is discussed in this thesis that use of cross compiler and cross debugger in embedded system software development toolkit.
其中在嵌入式软件开发工具中，使用的最多的工具就是交叉编译器和交叉调试器，同时这两者也是嵌入式软件开发工具的最核心部分。 - Strengthen with enlarging cross-section and software design for compression member
扩大截面加固法与软件设计&受压构件加固 - Formulas for friction measurement using elastic cantilever are derived, and the cross section of cantilever is determined using FEA ( finite element analysis) software.
推导了弹性悬臂梁测量摩擦力的公式，并用有限元软件分析了弹性悬臂梁的变形，确定了合适的截面形状。 - The well cross section design software of side-tracking wells is developed, which can satisfied the demand of side-tracking wells design and construction, it also includes well cross section computing and prediction of well track.
研制开发以侧斜井的井身剖面设计为主的计算机软件，同时包括井身剖面计算及井眼轨迹预测功能，能满足侧斜井施工的需要。 - Through the simulation of the process of cross wedge rolling axis with the help of FEM software ANSYS-DYNA, the alternating rule of radial strain and lateral strain on different cross section of workpiece during finishing stage has been analyzed.
应用ANSYS/LS-DYNA有限元软件，对楔横轧轴类件进行轧制过程的模拟，分析了精整段轧件不同横截面中心点径向应变和横向应变的交变规律。 - Using the cross model modified and MATLAB software, the composites modulus and stress on a fiber section at tensile load are calculated.
由修正后的交叉模型应用MATLAB计算了三维编织复合材料的弹性模量和拉伸载荷下纤维束截面的应力情况。 - In order to reduce cross talk, the software method for cross talk correction was presented in this paper.
为了消除通道间交扰的影响，我们提出了超声多普勒血流测量中通道间交扰的软件校正方法。 - CCD receives the optical imaging of Cross Divisional Board. The decentration measurement software processes the digital image provided by Image Acquisition System.
CCD接收十字分划板的光学成像，中心偏测试软件处理处理由图像采集系统提供数字图像。 - In this paper, the numerical simulation on the wholly rolling process of trio cross wedge rolling has been finished, by using finite element software DEFORM.
本文通过DEFORM有限元软件理论建模，对三辊楔横轧整个轧制过程进行了模拟计算。 - Message-oriented middleware provides a common way to create, send and receive message in distributed systems, it reduces the complexity in developing the cross platform and network protocol software.
消息中间件为分布式系统中创建、发送、接收消息提供了一套可靠、通用的方法，它屏蔽了不同操作系统和网络协议的具体细节，减少了开发跨平台和网络协议软件的复杂性。 - Design of cross platform software systems
跨平台软件系统的设计 - In this paper, two axle flexible bending is introduced briefly and compared with the traditional three axle bending, the theoretical model of the abnormal cross section bending is deduced, the composing of hardware and the realization of software are expatiated on.
本文简单介绍了双轴柔性滚弯并将其与传统的三轴滚弯进行了比较，推导了异形截面滚弯的理论模型，详细阐述了数控系统的硬件构成及软件实现。 - This paper researches several different levels of cross platform technology and accounts for the choices about each level of cross platform technology aiming at the characters of GIS software and the request of cross platform technology for GIS. An architecture of cross platform GIS is presented.
论文研究了跨平台技术的几个不同层次，并且针对GIS软件自身的特点和对跨平台技术的要求，说明了对各层次跨平台技术的选择，同时分析了跨平台GIS的体系结构。 - A microprocessor development system is introduced, which consists of a cross assembler, a simulator and other software.
本文介绍了由交叉汇编程序和模拟运行程序等软件构成的微机开发系统。 - Embedded cross debugging software based on JTAG
基于JTAG技术的嵌入式交叉调试软件 - The main task of IDE is to construct cross developing environment to support the whole period of embedded software development, from the edit and management of source files to the RTOS configuration, from generation of the object code to software debugging.
它的主要任务是建立交叉开发环境，为星载嵌入式应用开发者提供从源程序编辑、源文件组织管理、系统组件参数配置、目标代码生成到目标代码调试等全过程的强有力的支持。 - This paper elaborated the development content of cross platform software under WOSA/ XFS standard in detail, as well as my question and solution which meet in the development process.
本文详细阐述了WOSA/XFS规范下跨平台软件的开发内容，以及本人在开发过程中遇到的问题和解决方法。 - This paper present principles of developing complicated parametric surfaces, derived the algorithms for approximate development of surfaces and section curves, and implemented the approximate development for free form surfaces using cross section, and codes C++ application software.
分析了复杂参数曲面的展开原理，采用了截面剖分算法实现自由曲面的近似展平，推导了曲面和截面线的展开算法，开发了C++语言应用程序，给出了应用实例。 - Randomized cross Controlled Trial of Electronic Measurement of Health-Related Quality of Life with Software QL-Recorder: A Comparison of an Electronic Version of the SF-36 to the Paper Version
电子化测量健康相关生命质量的随机交叉对照试验SF-36电子版和纸质版的比较 - With all elements 'conductivity being considered as one, the data and curve from adjacent, polar and cross drive patterns are compared with EIT simulating software.
利用开发的电阻抗仿真软件，在有限元模型中所有单元电导率为1均匀背景下，比较了相邻、相对、交叉驱动模式下的数据和曲线。 - Only a fundamental model for infrared radiation and radar cross section of bomber is needed at this stage because the software needs a kind of expansion by users.
由于软件最终还需要用户进行扩充，在现阶段对于轰炸机红外目标辐射模型与雷达散射截面积模型只需采用简单的形式。 - A new ( method) is used to pick-up synchronous information via cross correlation technique, which is proved by Matlab emulation software. Finally, the video signal is correlative averaged from the TEMPEST ATTACK equipments, making reconstructed information image stable and readable.
首先提出了用互相关技术提取行同步信息的新方法，并用Matlab仿真加以验证，最后对TEMPESTATTACK设备输出的视频信号进行了互相关平均处理，使重建的信息图像稳定、可辨识。 - Study on the Cross-platform Technology of Applied Software
应用软件跨平台技术的研究 - At the same time, to run application software smoothly and efficiently in hardware platform, we select embedded system to build cross compiler environment, and transplant the bottom and custom software for the development board.
同时，为保证应用软件能在硬件平台上高效的运行，选择嵌入式操作系统，建立交叉编译环境，对开发板进行底层软件定制与移植。 - Different from general software, the embedded software should be developed in cross developing pattern. The development of embedded software has the following characteristics: great difficulty, long period, small-sized object code, stringent request for the reliability, and so on.
星载嵌入式软件的开发不同于通用软件开发，一般采用交叉开发的模式，其特点是软件开发难度大、开发周期长、目标代码小、程序可靠性要求高等。 - Then, the distribution of pump light and laser in the optical fiber, the length of fiber, reflectivity of cavity mirrors, optical fiber loss, cross section of the fiber and the doping concentration are simulated using the simulation software ( MATLAB).
利用仿真软件，模拟泵浦光和激光在光纤中的分布，光纤长度、腔镜反射率、光纤损耗、截面和掺杂浓度等对输出功率和阈值功率的影响。